Firmware PowerPDU 4PS: 4.0.1 (3,4 MB)
2023/09/23
= Firmware for NETIO PowerPDU 4PS – version 4.0.1-1.54 – release notes =
* Archive contains two update packages. One for main system upgrade and the second one "mcu" marked package for main system + low level system upgrade.
XXX.package = main system upgrade package
XXX+mcu-output-restart.package = main system + low level system upgrade package --- THIS PACKAGE CAUSES OUTPUT RESTART
* When no critical infrastructure is connected to the device we recommend to use XXX+mcu.package update package.
This firmware is for device:
- PowerPDU 4PS
==== Main system v 4.0.1 ====
- The API for the main system has been changed, therefore this update is not backwards compatible with pre 4.0.0 versions, once you upgrade to this version and newer, you won't be able to downgrade.
- Syslog - You can now use the syslog (settings -> system) protocol to log the device updates.
- Rules - Sequences - Ability to set seqences of actions with delays in Rule action configuration.
- Rules - Startup rules - Use the device power up conditions in rule conditions.
- PAB - Sunrise & Sunset - "DAYLIGHT" PAB rules based on the sun position in a given geolocation can be used in rule conditions.
- PAB - Fixes in conditioning with rules
- JSON - JSON event that can be used as a condition in rule configuration.
- System - Password brute force attack protection.
- System - Output name and password length increased to 32 characters.
- System - Timezones now display status of DST (Daylight Savings Time). DST is activated automatically.
- MQTT - Support for wildcards in MQTT.
- MQTT - Now includes 'UTC_TIME' variable.
- MQTT - Now allows to subscribe as an event to trigger actions using rules.
- MQTT - New feature called groupEvents, allows to setup a group of different topics to be published by a single event.
- MQTT - Properly supports backlash escape characters in payloads.
- SNMP - Scalar "Zero" when getting value by OID is not required
- Watchdog - Deleting watchdogs no longer causes device restart.
- Watchdog - Limit increased to 32.
- Watchdog - New connectivity rules based on the state of the device networking.
- Watchdog - New behaviour, upon configuration watchdog will be set to 'fail = false' and it will go to a state of rebooting (activates again).
- NETIO Cloud - Output & device name now synchronize with cloud on change.
- Firmware update - fixed issue when firmware update failed sometimes
- Bug fuxes and system optimalization
- Passwords - maximum length extended to 32 characters
==== Low level system v 1.54 ====
- Bug fixes and system optimalization
In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu.
Firmware PowerPDU 4PS: 3.2.6 (3,4 MB)
2022/11/02
* Archive contains two update packages. One for main system upgrade and the second one "mcu" marked package for main system + low level system upgrade.
XXX.package = main system upgrade package
XXX+mcu-output-restart.package = main system + low level system upgrade package --- THIS PACKAGE CAUSES OUTPUT RESTART
* When no critical infrastructure is connected to the device we recommend to use XXX+mcu.package update package.
This firmware is for device:
- PowerPDU 4PS
==== Main system v 3.2.6 ====
- Scheduler - fix of late afternoon / night interval incorrect saving
- Scheduler - possibility to select again "None" after selecting other before
==== Low level system v 1.53 ====
- Bug fixes and system optimalization
In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu.
Firmware PowerPDU 4PS: 3.2.5 (3,4 MB)
2022/05/12
Firmware PowerPDU 4PS: 3.2.0 (3,3 MB)
2021/11/17
* Archive contains two update packages. One for main system upgrade and the second one "mcu" marked package for main system + low level system upgrade.
XXX.package = main system upgrade package
XXX+mcu-output-restart.package = main system + low level system upgrade package --- THIS PACKAGE CAUSE OUTPUT RESTART
* When no critical infrastructure is connected to the device we recommend to use XXX+mcu.package update package.
This is for devices:
- PowerPDU_4PS
==== Main system v 3.2.0 ====
- PAB: (Power Analyzing Block) defines sets of conditions for creating events from the time course of measured variables (current, voltage, S0 pulses etc.). You can then work with events in Rules.
- Watchdog: Watchdog is a tool that allows you to ping a given (IP) address and evaluation of success.
- Rules: Rules allow to trigger follow-up actions based on events from PAB, Watchdog or Digital Inputs (DI). The actions can change output states (turn OFF, turn ON, toggle, etc.) or trigger an alarm in NETIO Cloud.
- Support for NETIO Cloud Premium
- Support for remote FW update from NETIO Cloud
- Support for control by mobile app NETIO Mobile2 over NETIO Cloud
- Bug fixes and the system optimalization
==== Low level system v 1.48 ====
- Bug fixes and system optimalization
In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu.
Firmware PowerPDU 4PS: 3.1.3 (3,4 MB)
2021/05/11
* Archive contains two update packages. One for main system upgrade and the second one "mcu" marked package for main system + low level system upgrade.
XXX.package = main system upgrade package
XXX+mcu-output-restart.package = main system + low level system upgrade package --- THIS PACKAGE CAUSE OUTPUT RESTART
* When no critical infrastructure is connected to the device we recommend to use XXX+mcu.package update package.
This is for devices:
- PowerPDU 4PS
==== Main system v 3.1.3 ====
- SNMP: support of SNMP v3
- Option to run SNMP in parallel to other M2M API protocol
- MQTT-flex: Longer username (128 chars) a password (256 chard) support for compatibility with MS Azure
- Improved firmware upgrade process
- SNMP bux fixes
- Bug fixes and the system optimalization
==== Low level system v 1.43 ====
- Support of the Device Power Loss Time
- The system optimalization
In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu
Firmware PowerPDU 4PS: 3.0.1 (3,3 MB)
2020/11/30
Firmware PowerPDU 4PS: 2.5.4 (2,99 MB)
2020/09/02
Firmware PowerPDU 4PS: 2.5.1 (2,94 MB)
2020/05/06
Firmware PowerPDU 4PS: 2.4.4 (2,81 MB)
2020/03/09
- PowerPDU 4PS
- MODBUS API support
- JSON API v2.2 support
- XML API v2.2 support
- MQTTflex support
- Telnet support
- 3 outputs control (DE, FR, UK socket variants)
- Relay last state control
- Delay output switch on after power up (PowerUp Delay + PowerUp state)
- IOC
- Main system safe start fixes