PowerDIN 4PZ firmware

=  Firmware for NETIO PowerDIN 4PZ – version 4.0.1-1.54 – release notes  =
 
* Archive contains two update packages. One for main system upgrade and the second one "mcu" marked package for main system + low level system upgrade.
 
XXX.package = main system upgrade package
XXX+mcu-output-restart.package = main system + low level system upgrade package --- THIS PACKAGE CAUSES OUTPUT RESTART
 
* When no critical infrastructure is connected to the device we recommend to use XXX+mcu.package update package.
 
This firmware is for device:
 
 - PowerDIN 4PZ
 
==== Main system v 4.0.1 ====
 
- The API for the main system has been changed, therefore this update is not backwards compatible with pre 4.0.0 versions, once you upgrade to this version and newer, you won't be able to downgrade.
 - Syslog - You can now use the syslog (settings -> system) protocol to log the device updates.
 - Rules - Sequences - Ability to set seqences of actions with delays in Rule action configuration.
 - Rules - Startup rules - Use the device power up conditions in rule conditions.
 - PAB - Sunrise & Sunset - "DAYLIGHT" PAB rules based on the sun position in a given geolocation can be used in rule conditions.
 - PAB - Fixes in conditioning with rules
 - JSON - JSON event that can be used as a condition in rule configuration.
 - System - Password brute force attack protection.
 - System - Output name and password length increased to 32 characters.
 - System - Timezones now display status of DST (Daylight Savings Time). DST is activated automatically.
 - MQTT - Support for wildcards in MQTT.
 - MQTT - Now includes 'UTC_TIME' variable.
 - MQTT - Now allows to subscribe as an event to trigger actions using rules.
 - MQTT - New feature called groupEvents, allows to setup a group of different topics to be published by a single event.
 - MQTT - Properly supports backlash escape characters in payloads.
 - SNMP - Scalar "Zero" when getting value by OID is not required
 - Watchdog - Deleting watchdogs no longer causes device restart.
 - Watchdog - Limit increased to 32.
 - Watchdog - New connectivity rules based on the state of the device networking.
 - Watchdog - New behaviour, upon configuration watchdog will be set to 'fail = false' and it will go to a state of rebooting (activates again).
 - NETIO Cloud - Output & device name now synchronize with cloud on change.
 - Firmware update - fixed issue when firmware update failed sometimes
 - Bug fuxes and system optimalization
 - Passwords - maximum length extended to 32 characters
 
==== Low level system v 1.54 ====
 
 - Bug fixes and system optimalization
 
In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu.



 

=  Firmware for NETIO PowerDIN 4PZ – version 3.2.5-1.49 – release notes  =

 

* Archive contains two update packages. One for main system upgrade and the second one "mcu" marked package for main system + low level system upgrade. 

 

XXX.package = main system upgrade package

XXX+mcu-output-restart.package = main system + low level system upgrade package --- THIS PACKAGE CAUSES OUTPUT RESTART

 

* When no critical infrastructure is connected to the device we recommend to use XXX+mcu.package update package.

 

This is for devices:

 

 - PowerDIN 4PZ

 

==== Main system v 3.2.5 ====

 

 - Activation of static IP mode by button

 - Modbus/TCP protocol update for devices with energy metering and digital inputs

 - Telnet protocol - commands response format

 - MQTT-flex protocol - parameters length update, MS Azure IoT Hub compatibility

 - Default PAB, Rules configurations update

 - Bug fixes and the system optimalization

 

 

==== Low level system v 1.49 ====

 

 - Bug fixes and system optimalization

 

In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu.

 

=  Firmware for NETIO PowerDIN 4PZ  – version 3.1.3-1.43 – release notes  =

* Archive contains two update packages. One for main system upgrade and the second one "mcu" marked package for main system + low level system upgrade.

XXX.package = main system upgrade package
XXX+mcu-output-restart.package = main system + low level system upgrade package --- THIS PACKAGE CAUSE OUTPUT RESTART

* When no critical infrastructure is connected to the device we recommend to use XXX+mcu.package update package.

This is for devices:

 - PowerDIN 4PZ

==== Main system v 3.1.3 ====

 - SNMP: support of SNMP v3
 - Option to run SNMP in parallel to other M2M API protocol
 - MQTT-flex: Longer username (128 chars) a password (256 chard) support for compatibility with MS Azure
 - Added Reverse Energy counters - energy delivered back to the grid from connected device
 - Added non-resetable Energy counters - Energy NR, Reverse Energy NR, Total Energy NR, Total Reverse Energy NR
 - Adjustment of the Phase range: 0° - 360°
 - Adjustment of electrical measurement in web administration
 - Inputs and S0 sounters support in M2M API - Modbus/TCP
 - Improved firmware upgrade process
 - SNMP bux fixes
 - Bug fixes and the system optimalization


==== Low level system v 1.43 ====

 - Support of the Device Power Loss Time
 - Support of the Reverse Energy counters
 - The system optimalization

In case of any problems or questions please visit www.netio-products.com or contact the support at support@netio.eu.