AN37 shows how to create a .bat file to set the outputs of several NETIO devices using the PyNetio utility. JSON API, which is enabled by default, is used for the communication. AN37 incudes sample .bat files for various configurations of outputs.
Om7Sense is German software producer of DCIM systems to monitor & optimize your datacenter or related IT infrastructure about power, environment sensors, optimal cooling control and related features. NETIO products are seamlessly integrated in the system with using even high security protocols.
The Domoticz home automation system can read measured values and control individual power outlets on a NETIO smart socket device. The example is applicable to NETIO 4All, PowerCable REST and other NETIO products that support JSON over HTTP. Domoticz is a Home Automation System that can configure, control and monitor various devices. It can run in a Docker container, a FreeNAS storage device, a local PC, or even a Raspberry Pi.
NETIO AN32 demonstrates how to control outputs and read measurements (kWh, A, V) from the 110/230V smart sockets from a Node-RED application using the Modbus/TCP protocol.
Node-RED is a programming tool for wiring together hardware devices, APIs and online services. Modbus/TCP is an industry-standard protocol. The Application Note applies to NETIO 4x devices as well as PowerCable Modbus 101x power sockets with WiFi.
Node-RED is a programming tool for wiring together hardware devices, APIs and online services. The AN31 Application Note shows how to control NETIO 110/230V smart sockets from Node-RED using HTTP - REST XML.
The AN30 Application Note demonstrates how to read consumption data from NETIO 4x and PowerCable REST smart socket devices and how to control their outputs using REST API – JSON. The netio.json file is transferred over http. Node-RED is a programming tool for wiring together hardware devices, APIs and online services. It can run, for example, in a cloud, on a local PC, or in a Raspberry Pi.
Node-RED is a programming tool for wiring together hardware devices, APIs and online services. The AN29 Application Note shows how to control 110/230V smart sockets from Node-RED using URL API. Invoking an URL is a simple but only a one-way solution (it is possible to control NETIO 4x outputs from Node-RED but it is not possible to measure consumption).
NETIO AN28 describes how to control NETIO devices and read data from them with a Crestron control processor and the SIMPL environment. Http(s) and JSON are used.
The AN27 Application Note demonstrates how to control NETIO 4x smart sockets and PowerCable Modbus devices using the Modbus/TCP protocol. Modbus/TCP is the de-facto industry standard for connecting sensors and devices to PLCs, SCADA systems and smart home systems. NETIO products can be controlled over Modbus/TCP as 1-bit outputs (“coils”). In addition, values can be measured and advanced control is possible using registers.
AN26 shows how to connect NETIO smart sockets with the IoT Hub (part of MS Azure). Standard M2M MQTT for NETIO 4x products is used. MQTT flex is not supported.
Do you need an indication that any out of 10 LAN devices is not working or unavailable? Regardless of whether a cable got loose, WiFi was disconnected or the UPS failed, when one or more of the ten devices fail to respond to PING, the Lua script described in this Application Note lights up a red warning light.
AN24 is a Lua script that detects the presence of an IP address in the network and signals the result by switching a selected output on or off. In this way, it is possible for example to switch off certain equipment when a central printer is switched off, or to signal that someone is present in an office (reachable IP address of a notebook or a phone).
NETIO AN23 demonstrates how to connect NETIO devices (LAN / WiFi power sockets) to the ELAN AV system and control power sockets. It's using the Netio Driver for ELAN by Intrinsic. NETIO ELAN driver is available as PRO version to control device outputs, with energy consumption monitoring and Output status feedback.
AN22 presents an example of connecting ProfiLab-Expert 4.0 with NETIO power sockets using Modbus/TCP. The example shows how to control the outputs and measure all accessible parameters.
The AN21 Application Note shows how to access measurements and control electrical sockets on a NETIO 4x device from third-party applications using the JSON protocol. AN21 demonstrates several different ways to control NETIO power sockets by transferring a netio.json file over http. The first method uses the “Device HTTP(s) File Upload” tool in the device’s web interface. The second method transfers the JSON file using a Chrome browser extension. The third method uses CURL (command-line tool) to transfer files over http.