NETIO PowerPDU 8QS is a PDU (Power Distribution Unit) with eight power outputs (8x IEC-320 C13) controlled and metered over a LAN. It fits into a 19” cabinet (1U). Each output can be switched on/off individually. PowerPDU 8QS supports two channels for electrical measurements: the PDU as a whole (all outputs combined), and the first output separately (All Outputs + 1). A digital input (DI) can be used to control the outputs or count S0 pulses (electricity meter output).
NETIO PowerPDU 8QS can be configured with a web browser (allows output control, connection to NETIO Cloud, Open API communication settings, etc.).
Thanks to the Open API, integration with third-party systems using various protocols (JSON, Modbus/TCP, SNMP, MQTT-flex, Telnet, ...) is easy. Ready-made AV drivers make it simple to connect the NETIO PDU to professional Audio/Video systems such as Neets, Crestron, Control4, RTI, Savant and more.
With the NETIO Cloud service, the outputs can be controlled from anywhere. The NETIO Cloud service, provided for a fee, uses SSL security and servers in Europe.
The NETIO Mobile2 app controls each output individually over LAN (local network).
To switch the outputs on in a sequence, a power-up delay can be configured for each output.
Open API: Supported M2M protocols
One Open API protocol can be used at a time, chosen from among the supported M2M protocols:
- SNMP v1 AN11, AN41
- SNMP v3
- MQTT-flex AN40
- Telnet AN10
- Modbus/TCP AN27, AN22, AN37
- JSON over HTTP AN21, AN30, AN42
- XML over HTTP AN20, AN31
- URL API (http get) AN19, AN29
- HTTP(s) Push JSON
- HTTP(s) Push XML
Regardless of the Open API used, the PowerPDU 8QS can be always controlled from its web interface and from the NETIO Cloud service. The customer can take advantage of the NETIO Cloud service and one Open API protocol simultaneously.
Useful links:
- ANxx – Application Notes
- NETIO Wiki (for programmers): Wiki.netio-products.com
- Download the NETIO Open API description: Download page
Typical applications
- In IT, the smart PowerPDU 8QS is typically used to distribute electricity in a 19" rack (cabinet) in a data center.
- Saving energy in meeting rooms (Scheduler switches equipment on/off at predefined time).
- Controlling the power (to TV sets, audio systems, lighting) from various AV systems in stores, smart homes, museums, digital signage applications.
- The outputs of several NETIO products can be controlled using the NETIO Mobile 2 app, as long as the app is connected to the same network.
- The outputs of multiple devices can be controlled centrally using the NETIO Cloud service (for a fee).
Ask for a price or technical parameters
Documents to download
|
|
 |
|
Electrical measurements
NETIO PowerPDU 8QS measures electrical parameters – at the input for the device as a whole (All Outputs) as well as at the first output (Output 1). Measured values are displayed in the web administration interface and at the same time are accessible via Open API protocols. NETIO PowerPDU 8QS measures with accuracy better than 1%.
Parameters measured for the whole device:
- Grid frequency [Hz]
- Electrical voltage [V]
- Total current [A]
- Total power [W]
- Overall TruePF [-])
- Overall phase shift [°]
- Total energy [kWh]
- Total reverse energy [kWh]
Parameters measured for output 1:
- Current [A]
- Power [W]
- TruePF [-]
- Phase shift [°]
- Energy [Wh]
- Reverse energy [Wh]
>> More about electrical measurements
DI (Digital Input)
The DI can be connected to a button (dry contact) or used as a S0 pulse counter for reading energy consumption from an external electricity meter.
The DI state and the S0 counter value are shown in the web interface and accessible over Open API.
- Digital input (DI): 1x input (contact) + S0 counter (4 bytes)
- Power for DI: 12V power (max 50mA)
>> More about DI (Digital Input)
NETIO Cloud
NETIO Cloud is an ideal solution for remote control and restarting. It is accessible via any web browser: https://cloud.netio-products.com/
The NETIO Cloud service is provided for a fee and supports NETIO products.
- All devices produced by the NETIO products company can be connected to NETIO Cloud.
- Thanks to the included “Welcome credit”, the service can be used at no cost for the first 3 years.
- Devices connected to the service can be controlled securely from anywhere over the Web (HTTPs).
- NETIO Cloud can be used in parallel with most of another Open API protocols.
- Communication with the Cloud service is secured (port 8883 - MQTTs - TLS).
- NETIO Cloud uses a separate Open API (MQTTS protocol) to control all devices linked to a given user account.
Industrial product quality
Industrial product quality- Open M2M API
- Wide operating temperature range
- PowerUp state – defined output state after power-up
- PowerUp delay – outputs switched on after a delay
- Input current up to 16A (output current max 10A / output)
- Low internal consumption
- Firmware upgradeable over the web, backwards compatibility
- Very accurate electrical measurements, each unit is factory-calibrated
- IOC – Independent Output Control
- ZVS – Zero Voltage Switching
ZVS (Zero Voltage Switching)
ZVS controls the exact time when the mechanical relay contacts close and open. The relay contacts switch the output on or off when the voltage crosses the zero level.
- In the long term, ZVS support reduces the product failure rate due to internal relay damage.
- Since the relay switches when the sinusoidal voltage waveform crosses the zero level, negative effects of inrush current are significantly reduced.
- The ZVS and PowerUp delay functions reduce the chance of circuit breakers tripping when power is restored after an outage.
- ZVS extends the lifetime of connected equipment, especially in case of frequent on/off switching of devices that are not designed for that (such as switching power supplies).
Scheduler (timed switching of individual outlets)
- Each output can have its own schedule
- When a schedule is active, outputs can still be controlled with NETIO Cloud, the web interface and Open API
-
Scheduler functionality can be enabled/disabled (not edited) for each output from the NETIO Mobile 2 app.
- Scheduler does not need an internet connection. However, a time source is needed – provided over the internet or, for example, by a local ADSL / WiFi router.
-
For special usage the Scheduler can be combined with PAB (Power Analyze Blocks):
- Switching time is based on current sunrise/sunset based on your location
- Whatever happend, defined output can be switched off on defined time (midnight for example).
- Ask for more..
>> More information about the Scheduler
Power-Up state
- On
- Off
- LAST state restores the last state before the power was disconnected
Delay sequence when switching outputs on (PowerUp delay)
After a power outage, some electrical equipment can be switched on with a delay to avoid overloading and tripping circuit breakers. With the PowerPDU 8QS, use these parameters: “Power-Up state” = ON / LAST, and “Output PowerUp interval” = power-up delay before switching that particular output on.
WatchDog Ping + Power
PowerPDU 8QS is equipped with WatchDog PING (IP WatchDog) and WatchDog Power consumption (PAB).
-
WatchDog Ping continuously monitors whether a given process or a part of a system work as they should. If not, the WatchDog restarts the process. Can be used for all 8 outputs.
-
WatchDog Power is "Condition" & "Action" (PAB - Power Analysis Block & Rules) based autonomous system. It continuously monitors current (energy) of monitored device powered from any metered power output of NETIO PDU device.
Only Output1 supports energy metering, so this feature can be used with Output1 only.
>> Glossary: WatchDog PING (IP WatchDog)
>> Glossary: WatchDog - Power consumption (PAB)
Mobile App
- LAN: NETIO Mobile 2 can control all outputs of devices within local LAN (WiFi).
- Cloud: User account on the NETIO Cloud service can be connected to the mobile app.
- Control individual power outputs – switch ON, switch OFF, RESET
- Read power consumption data (A, W, Wh), if this one output (device) supports energy metering
-
Activate / deactivate the week Scheduler function per each output
- Sorting of outputs within groups (by function or location)
-
Output grouping – default group per one device can be changed individualy
- Group control - Switch the whole group of outputs On / Off
-
Group control - Activate / deactivate the week Scheduler function for each output in whole group
- Change output / device name (visible in the mobile application only)
- Add multiple devices to the mobile app.
- LAN discover: Search your LAN/Wifi network for NETIO devices.
